REQUIREMENTS FOR PAD-MOUNTED, COMPARTMENTAL-TYPE, SELF-COOLED, THREE-PHASE DISTRIBUTION TRANSFORMERS, 10 MVA AND SMALLER HIGH-VOLTAGE, 34. VENTILATED DRY-TYPE POWER TRANSFORMERS, 501 KVA AND LARGER, THREE-PHASE, WITH HIGH-VOLTAGE 601 V TO 34 500 V LOW-VOLTAGE 208Y/120 V TO 4160 V - GENERAL REQUIREMENTSĭRY-TYPE DISTRIBUTION AND POWER TRANSFORMERS
#UFC 3 530 01 CODE#
NATIONAL ELECTRICAL SAFETY CODE (NESC)(R) SMOOTH-WALL COILABLE ELECTRICAL POLYETHYLENE CONDUIT LIQUID-IMMERSED DISTRIBUTION, POWER, AND REGULATING TRANSFORMERSĥ-46 KV SHIELDED POWER CABLE FOR USE IN THE TRANSMISSION AND DISTRIBUTION OF ELECTRIC ENERGY UFC 3-501-01 provides the governing criteria for electrical systems, explains the delineation between the different electrical-related UFCs, and refers to UFC 3-520-01 for interior electrical system requirements. HIGH-VOLTAGE (>1000 V) EXPULSION AND CURRENT-LIMITING POWER CLASS FUSES AND FUSE DISCONNECTING SWITCHES GUIDE FOR LOADING DRY-TYPE DISTRIBUTION AND POWER TRANSFORMERS Includes daylight, controls, and hazardous materials in lighting. Maximum to minimum uniformity: This is often used in applications where. continuous and therefore give a better value than maximum and minimum. Typically this is used for areas where the lighting may not be. MAINTENANCE TESTING SPECIFICATIONS FOR ELECTRICAL POWER EQUIPMENT AND SYSTEMS UFC 3-530-01, Interior and Exterior Lighting Systems and Controls Section 2 Primary reference for lighting design and renovation and includes guidance going beyond illumination standards. Average illuminance: This criterion is typically used to give an approximate.
STANDARD FOR GENERAL REQUIREMENTS FOR LIQUID-IMMERSED DISTRIBUTION, POWER, AND REGULATING TRANSFORMERS RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE UNIFIED FACILITIES CRITERIA - AIRCRAFT MAINTENANCE HANGARS: TYPE 1, TYPE 2 AND TYPE 3 REQUIREMENTS FOR SUBSURFACE, VAULT AND PAD-MOUNTED LOAD-INTERRUPTER SWITCHGEAR AND FUSED LOAD-INTERRUPTER SWITCHGEAR FOR ALTERNATING CURRENT SYSTEMS UP TO 38 KV HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 111: AUTOMATIC CIRCUIT RECLOSERS AND FAULT INTERRUPTERS FOR ALTERNATING CURRENT SYSTEMS UP TO 38 KV UFC 4-022-01, Entry Control Facility Access Control. facility, including the development of an interior signage package, using color and. Interior design for military facilities must incorporate methods of way finding through the. Use fixtures that have a 4000K color temperature in all other zones. Unified Facilities Criteria (UFC) 3-530-01, Interior and Exterior Lighting. See UFC 3-530-01, Design: Interior and Exterior. Use light fixtures in the Sea Turtle-Friendly Lighting Zone that are amber in color. 29 Skylight area should be between 2 to 9 of the floor area depending on the climate optimization 4-9 GLARE AND CONTRAST CONTROL. Refer to Section C09.5.1, Luminaire Specifications, for light fixture style and pole heights. GENERAL REQUIREMENTS FOR DRY-TYPE DISTRIBUTION AND POWER TRANSFORMERS UFC 3-530-01 22 August 2006 Including Change 3, 1 September 2013 58 Toplighting systems located at least 1.5 times the mounting height on center can provide even daylight distribution. UNIFIED FACILITIES CRITERIA - ELECTRICAL ENGINEERING Which would you use in large parking lots and industrial yards c. UFC 3-555-01N 400 Hertz Medium Voltage Conversion/Distribution and Low Voltage Utilization. UFC 3-550-01 Exterior Electrical Power Distribution.
#UFC 3 530 01 GENERATOR#
UFC 3-540-01 Engine-Driven Generator Systems for Backup Power Applications. UFC 3-535-01 Visual Air Navigation Facilities. Which allows security forces to see peoples faces at security checkpoints b. UFC 3-530-01 Design: Interior and Exterior Lighting and Controls. UNIFIED FACILITIES CRITERIA - DOD MINIMUM ANTITERRORISM STANDARDS FOR BUILDINGS UFC 3-530-01, Interior and Exterior Lighting Systems and Controls, Change 3. RELAYS AND RELAY SYSTEMS ASSOCIATED WITH ELECTRIC POWER APPARATUS GUIDE FOR SWITCHGEAR - UNIT SUBSTATION - REQUIREMENTS
#UFC 3 530 01 MANUAL#
Upgrades or modifications of existing facilities must apply the design criteria in this UFC, but it is not intended that an entire facility require modernization solely because of a minor modification to a part of the facility.UNIFIED FACILITIES CRITERIA - DOD SECURITY ENGINEERING FACILITIES PLANNING MANUAL Modernization of electrical systems within existing facilities solely for the purpose of meeting design criteria in this UFC is not required. UFC 3-501-01 provides the governing criteria for electrical systems, explains the delineation between the different electrical-related UFCs, and refers to UFC 3-520-01 for interior electrical system requirements. Whenever unique conditions and problems are not specifically covered by this UFC, use the applicable referenced industry standards and other documents for design guidance. The criteria contained herein are intended to ensure economical, durable, efficient, and reliable systems and installations. This Unified Facilities Criteria (UFC) has been issued to provide guidance for the design of interior electrical systems.
0 kommentar(er)
